To Next PageTo Next Page
Need help?Do you have a question about the Wilo Wilo-Stratos PICO 25/1-6 and is the answer not in the manual?
General| Max Head | 6 m |
|---|---|
| Voltage | 230 V |
| Protection Class | IP42 |
| Max Operating Pressure | 10 bar |
| Installation Length | 180 mm |
| EEI | ≤ 0.20 |
| Type | Circulating Pump |
| Supply Voltage | 1 x 230 V, 50/60 Hz |
Basic safety information and adherence requirements for installation and operation.
Provides detailed technical data including voltage, IP class, and temperatures.
Explains Variable Differential Pressure (Ap-v) and Constant Differential Pressure (Ap-c) modes.
Describes Setback, Dynamic Adapt, Venting Routine, and Key Lock functions.
Step-by-step guide for physically installing the pump in the system.
Instructions for safely connecting the pump to the electrical supply.
Covers initial pump operation, filling, and venting the system.
Procedure for adjusting the pump's delivery head setting.
How to select and configure different pump control modes.
