To Next PageTo Next Page
Need help?Do you have a question about the Wilo Atmos PICO and is the answer not in the manual?
General| Max Flow Rate | 2.5 m³/h |
|---|---|
| Max Head | 6 m |
| Protection Class | IP42 |
| Insulation Class | F |
| Maximum Operating Pressure | 10 bar |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Connection Size | 1 inch |
| Type | Circulation Pump |
| Application | Domestic Hot Water Circulation |
| Max Liquid Temperature | 95°C |
| Weight | 2.1 kg |
General information about the installation and operating instructions and their importance for correct product use.
Details how safety instructions are displayed to prevent personal injury and property damage.
Explains the meaning of signal words like DANGER!, WARNING!, CAUTION!, and NOTE for safety communication.
Lists and explains the safety symbols used in the manual for hazard identification.
Provides a detailed list of all components and parts of the Wilo-Atmos PICO pump with reference to diagrams.
Lists key technical specifications, including voltage, IP class, temperatures, and operating pressure.
Describes the available control modes (e.g., variable differential pressure, constant speed) and their functions.
Defines what constitutes misuse of the pump and the consequences for liability claims.
Specifies the necessary conditions for safe transport and storage of the pump, including temperature ranges.
Step-by-step guide for correctly installing the pump into the system, including orientation and connection points.
Procedures and safety precautions for connecting the pump to the electrical supply, including wiring and protection.
How to select control modes and pump curves using the operating button and LEDs for optimal performance.
Explains fault indications via LEDs and provides troubleshooting steps for common issues.
Provides information on proper disposal and recycling of the product according to environmental regulations.
