Wilo Atmos PICO User Manual

10 Wilo SE 07/2019
en
Intended use includes observing these instructions and
the data and markings on the pump.
Misuse Any use beyond the intended use is considered misuse
and will result in the loss of all liability claims.
5 Transportation and storage
Scope of delivery • High-efficiency circulator with 2 gaskets
• Wilo-Connector
• Installation and operating instructions
Transport
inspection
Inspect for transportation damage and check complete-
ness immediately after delivery, and claim immediately if
necessary.
Transport and
storage conditions
Protect from moisture, frost and mechanical loads.
Permissible temperature range: -10 °C to +50 °C.
NOTE
Only add ready-to-use mixtures to the system.
Do not use the pump to mix the fluid in the
system.
WARNING!
Danger of injury or material damage due to improper
use!
• Never use non-specified fluids.
• Never allow unauthorised persons to perform work.
• Never operate the pump outside of the specified
limits of use.
• Never carry out unauthorised conversions.
• Use authorised accessories only.
• Never operate with phase angle control.

Wilo Atmos PICO Specifications

General

Max Flow Rate	2.5 m³/h
Max Head	6 m
Protection Class	IP42
Insulation Class	F
Maximum Operating Pressure	10 bar
Voltage	230 V
Frequency	50 Hz
Connection Size	1 inch
Type	Circulation Pump
Application	Domestic Hot Water Circulation
Max Liquid Temperature	95°C
Weight	2.1 kg