Need help?Do you have a question about the Wilo Yonos PICO 25/1-8 and is the answer not in the manual?
General| Max Head | 8 m |
|---|---|
| Voltage | 230 V |
| Protection Class | IPX4D |
| Energy Efficiency Index (EEI) | ≤ 0.20 |
| Pump Housing Material | Cast Iron |
| Supply Voltage | 230 V |
| Frequency | 50/60 Hz |
| Insulation Class | F |
| Maximum Operating Pressure | 10 bar |
| Installation Length | 180 mm |
| Type | Circulator Pump |
| Connection Size | 1" |
| Temperature Range | -10°C to +95°C |
| Impeller Material | Composite |
| Shaft Material | Stainless steel |
| Bearing Material | Carbon |
| Pump Type | Circulator pump |
Requirements for installation, dismantling, and personnel training.
Safety guidelines for electrical work and child supervision.
Risks from electric voltage, incorrect use, and hot surfaces/fluids.
Specifications for power cable type, length, and electrical connection.
Procedure for connecting the electrical plug and ensuring proper grounding.
Connecting the power supply and operating the switch.
Step-by-step guide to activate the pump's air venting function.
Table of error codes and their corresponding meanings.
To Next Page