To Next PageTo Next Page
Need help?Do you have a question about the Wilo YONOS ECO 25/1-5 BMS and is the answer not in the manual?
General| Max. delivery head | 5 m |
|---|---|
| Max. flow rate | 3.5 m³/h |
| Power consumption | 3-45 W |
| Voltage | 1~230 V |
| Frequency | 50/60 Hz |
| Protection class | IPX4D |
| Maximum operating pressure | 10 bar |
| Overall length | 180 mm |
| BMS | yes |
| EEI | ≤ 0.23 |
| Temperature range | -10°C to +110°C |
| Control mode | Δp-v, Δp-c |
Provides context about the origin and purpose of the operating instructions.
Explains the meaning of danger symbols and signal words used in the manual.
Specifies required qualifications and responsibilities for safe operation and maintenance.
Details risks of not following instructions, unauthorized changes, and misuse.
Outlines essential safety measures for installation and maintenance work.
Highlights dangers related to improper transport and storage of the pump.
Defines intended applications and alerts about health hazards.
Explains the type key and lists technical data for product identification.
Details included components and lists optional accessories available for purchase.
Provides a general overview of the pump's components and basic features.
Details the operational principles and control modes of the pump.
Provides instructions and precautions for physically installing the pump.
Explains insulation processes for different system applications.
Guides on connecting the pump to the electrical power supply safely.
Instructions for connecting the Wilo-Connector and control cable.
Instructions on how to fill and vent the pump and system correctly.
Guidance on choosing control modes and setting pump output.
Information on normal operation, interference, and safe shutdown procedures.
Detailed steps and safety warnings for dismantling and reassembling the pump.
Lists common faults, their causes, and recommended remedies for troubleshooting.
Explains fault signals, temporal response, and pump restart delays.
Information regarding spare parts and proper disposal of the product.
