Need help?Do you have a question about the Wilo Yonos PICO 30/1-8 and is the answer not in the manual?
General| Category | Water Pump |
|---|---|
| Max Head | 8 m |
| Voltage | 230 V |
| Frequency | 50/60 Hz |
| Maximum Operating Pressure | 10 bar |
| EEI | ≤ 0.20 |
| Installation Length | 180 mm |
| Type | Yonos PICO 30/1-8 |
| Temperature Range | -10°C to +95°C |
| Pump Connection | G 1½ |
Explains symbols for electrical, physical, thermal, and magnetic hazards.
Defines operational temperature range (-10°C to 95°C) and pressure limits (up to 10 bar).
Details electrical input: 1-230 V, 50/60 Hz with +/- 10% tolerance.
Describes starting the air purge by pressing the button once.
Specifies the 5-second duration for the air purge activation sequence.
Shows the display pattern indicating successful air purging.
Illustrates how error codes are presented on the pump's digital interface.
Lists common error codes (E04-E30) for diagnosing pump issues.
Declares conformity with EU directives on safety, EMC, and energy-related products.
To Next Page