Need help?Do you have a question about the Wilo Yonos PICO and is the answer not in the manual?
General| Pump Type | Circulator pump |
|---|---|
| Power Supply | 1~230 V, 50/60 Hz |
| Energy Efficiency Index | ≤ 0.20 |
| Temperature Range | -10°C to +95°C |
| Protection Class | IPX4D |
| Pumped Liquid | Water, water-glycol mixtures |
| Max Operating Pressure | 10 bar |
| Max Ambient Temperature | +40°C |
| Max Liquid Temperature | +95°C |
| Impeller Material | Plastic |
| Max Flow Rate | 3.5 m³/h |
| Max Head | 6 m |
| Application | Heating, air-conditioning |
| Operating Mode | Constant speed |
| Housing Material | Cast iron |
Explanation of how safety instructions are presented and the meaning of signal words and symbols.
Defines DANGER, WARNING, CAUTION, and NOTE signal words used for safety instructions.
Explains the meaning of symbols used in safety instructions, such as danger due to electrical voltage.
Details the required qualifications and instructions for personnel performing installation and maintenance.
Specifies requirements for electrical work, including adherence to regulations and safety precautions.
Outlines the operator's responsibilities, including safety, qualified personnel, and device usage by children.
Describes the high-efficiency circulator's function in hot-water heating systems with differential pressure control.
Key points to observe when installing the pump, such as direction arrow and connection.
States that electrical connection must be done by a qualified electrician and includes a danger warning.
Guide for setting the control mode (Ap-v, Ap-c) and delivery head based on radiator count or area.
Table listing common faults (e.g., Pump not running, Pump making noises) with their causes and remedies.
Details fault signals indicated by the LED display and fault signal LED, including error codes and restarts.
To Next Page