To Next PageTo Next Page
Need help?Do you have a question about the Wilo Wilo-Stratos PICO Series and is the answer not in the manual?
Explains the origin of the text, its integral nature, and adherence to instructions.
Explains symbols (danger, warning, caution) and signal words used in the manual.
Requirements for installation, operation, and maintenance personnel.
Details risks associated with not following safety guidelines.
Emphasizes compliance with safety instructions and regulations.
Safety precautions for users, including children and component handling.
Guidelines for authorized personnel performing installation and maintenance.
Discusses implications of unauthorized modifications and use of non-original parts.
Defines conditions for guaranteed operating safety and limit values.
Instructions for handling and storing the product to prevent damage.
Specifies the designed applications and approved fluids for the pump series.
Explains how to interpret the product model designation.
Lists key technical specifications like voltage, IP class, and temperatures.
Lists maximum operating pressure and minimum inlet pressure.
Lists the items included in the product package.
Details the pump's hydraulic system, motor, and control module.
Explains display indicators (W, m³/h, kWh) and basic operational concepts.
Details Variable (Ap-v) and Constant (Ap-c) differential pressure control modes.
Explains Dynamic Adapt, Venting routine, and Key lock functions.
Covers pump placement, pipe connections, and insulation.
Details how to turn the motor housing for correct installation.
Outlines safety precautions and requirements for connecting the pump electrically.
Provides specific guidance on mains connection, fuses, and wiring standards.
Discusses safety measures like using residual-current devices and preventing pulsed voltage.
Explains how to operate the pump using the red operating knob.
Guides on system filling and the pump's automatic venting process.
Describes how to adjust the pump's delivery head setting.
Explains how to select between different pump control modes.
Details how to activate or deactivate the Dynamic Adapt function.
Explains how to activate or deactivate the setback operation mode.
Describes how to activate and use the key lock to prevent setting changes.
Covers resetting the power consumption meter and restoring factory settings.
Provides safety warnings and general guidelines for maintenance work.
Lists common pump faults, their causes, and recommended remedies.
Explains error codes (E04-E36) displayed by the module and their meanings.
Information on ordering spare parts and required data.
Guidelines for environmentally friendly disposal and recycling of the product.
General| Protection Class | IP42 |
|---|---|
| Maximum Operating Pressure | 10 bar |
| Installation | Inline |
| Energy Efficiency Class | A |
| Application | Heating and cooling systems |
| Operating Mode | Variable speed |
| Energy Efficiency Index (EEI) | ≤ 0.20 |
| Fluid Temperature | -10 °C |
| Power Supply | 1~230V, 50Hz |
| Power Consumption | 2-45W |
| Pump Housing | Cast iron |
| Shaft | Stainless steel |
| Flow Rate | Up to 3.5 m³/h |
| Head | Up to 6 m |
| Control Type | Electronic |
