Wilo Yonos PICO 25/1-8 User Manual

2
EN
This document is a quick guide, the reference document is the
complete instruction manual available at www.wilo.com/yon-
os-pico/om or in printed form at the address mentioned on the
back page of this manual.
Thiscirculatorisexclusivelydesignedforcirculatinguidsin
hot-water heating systems and similar systems.
Installation/dismantlingmustbecarriedoutbyaqualiedtech-
nician.
Personnel must be instructed in the locally applicable accident
prevention regulations, have read and understood the installa-
tion and operating instructions.
The product must be operated by persons who are instructed in
the functioning of the complete system
Electricalworkmustbeperformedbyaqualiedelectrician:na-
tionally applicable guidelines, standards and regulations as well
asspecicationsbylocalenergysupplycompaniesforconnec-
tion to the local power supply system must be observed.
This device can be used by children from 8 years old as well as
persons with limited physical, sensory or mental capabilities
orlackofexperienceandknowledge,iftheyaresupervisedor
instructed in the safe use of the device and they understand the
dangers that may arise. Children are not allowed to play with the
device. Cleaning and user maintenance may not be carried out
by children without supervision.

Wilo Yonos PICO 25/1-8 Specifications

General

Max Head	8 m
Voltage	230 V
Protection Class	IPX4D
Energy Efficiency Index (EEI)	≤ 0.20
Pump Housing Material	Cast Iron
Supply Voltage	230 V
Frequency	50/60 Hz
Insulation Class	F
Maximum Operating Pressure	10 bar
Installation Length	180 mm
Type	Circulator Pump
Connection Size	1"
Temperature Range	-10°C to +95°C
Impeller Material	Composite
Shaft Material	Stainless steel
Bearing Material	Carbon
Pump Type	Circulator pump