WilTec SKD 3

© by WilTec Wildanger Technik GmbH Seite 10
http://www.WilTec.de
http://www.aoyue.eu
Version 7.2017
http://www.teichtip.de
Operation Manual
SKD 3
Pressure switch
-Artikel 51248 - 51245 -
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities please contact us.

WilTec SKD 3 Specifications

General

Brand	WilTec
Model	SKD 3
Category	Switch
Language	English

Summary

Introduction

Customer Service and Feedback

Provides customer service contact details and a form for reporting manual mistakes.

Safety Guideline

General Safety Precautions

Details essential safety warnings and precautions for using the device safely.

Specifications

Technical Specifications

Lists input voltage, pressure, temperature, connections, and protection class.

Functional Description and Malfunctions

Explains pump control operation and common causes/remedies for malfunctions.

Installation and Pump Control

Installation Guidelines

Provides guidance on water head limits, tap placement, and device orientation.

Pump Pressure Requirements

Specifies the device's pre-pressure setting and required pump pre-pressure.

Wiring Diagrams and Troubleshooting

Pump Motor Wiring Diagrams

Illustrates wiring for single-phase 220V and three-phase 400V pumps.

Dysfunction and Remedy Table

Lists common pump dysfunctions and their potential device or external causes.

Disposal Regulations

WEEE and Environmental Disposal

Explains EU guidelines for electronic waste disposal and environmental protection.