The device must be installed on a horizontal flat surface with the feet downwards. For safety
reasons, it not allowed to install the device otherwise.
Application area/functioning
This UVC device ensures clear water for healthy fish. The water is pumped by a pump through the
UVC device. There it flows past the UV lamp and is exposed to UVC radiation. Thus the bacteria,
germs and floating algae in the water are destroyed, and the water is clarified.
To achieve an optimal result the device should be operated 24 hours in the frost-free seasons.
Commissioning
Switch on the pump and wait until the device is filled with water. Check if all connections are well
sealed. By plugging in the power cable, the device is put into operation.
Technical data
Model
Item
number
Power
(W)
Ten-
sion/
fre-
quency
Suitable for … up to
(ℓ)
Recom-
mended
max. flow
rate (
ℓ
⁄
h
)
Input/output
(㎜)
Fish
ponds
Decorat-
ive
ponds
CPF-180 50123
11
230>V/
50>Hz
3000 6000 9000
19/25/32/40
CPF-250 50105 5000 10000 10000
CPF-280 51042 4000 8000 9000
19/25/32/38CPF-380 51043 6000 12000
10000
CPF-500 51044 18 10000 30000
CPF-2500 50978
11
3000 6000 6000 19/25/33
CPF-5000 50976 4000 8000 9000
19/25/32/40CPF-10000 50977 6000 12000
10000
CPF-15000 50121 18 10000 30000
CPF-20000 50979 36 20000 40000
12000
32/38
CPF-30000 50980 55 30000 60000 32/38
© by WilTec Wildanger Technik GmbH Item 50105, 50123, 50977–50980, 50121, 51042–51044 Page 5
http://www.WilTec.de
http://www.aoyue.eu 04 2021-1
http://www.teichtip.de
To Next Page
Loading...
Need help?
General
