EasyManua.ls Logo

WilTec SUNSUN HW-303

WilTec SUNSUN HW-303
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1. To set your filter up, the buckles (1) and (2)
should be unclipped from the main body of the
filter head; this will then separate the filter head
from the filter base.
2. You can then access your filter trays to
clean the filter media or add filter media. Re-
peat step one to refasten the filter head to the
filter base.
* UV unit depends on model.
3. Push the inlet and outlet taps into the filter
head and fasten using the small handle in
between the taps; this is also the valve shut.
After this, attach a hose to each tap and se-
cure using the screw taps.
© by WilTec Wildanger Technik GmbH Item 50192–50197, 50358, 50359 Page 4
http://www.WilTec.de
http://www.aoyue.eu 11 2020-1
http://www.teichtip.de

Related product manuals