Wimius P64 - Setting Up the Projector; Selecting Input Signal Source

B supportol@wimius.com
SETTING UP THE PROJECTOR
1.Select The Input Signal Source
Select the desired input signal source (HDMII/HDMI2/AV) on the home page, or you can press the “S” button on the
remote control to select the corresponding signal source, For USB devices, no need to choose the signal source. The
machine will detect them automatically.
When playing a video, you can press the menu button "=", then set the aspect ratio of the image and other
playback modes.
» gy |
Playlst
Mrocast