EasyManua.ls Logo

WiMo RANGER 811H - Circuit Description; Features; Introduction; RF Unit

WiMo RANGER 811H
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
(4)
SECTION 3
CIRCUIT DESCRIPTION
FEATURES Four vertically mounted 811A valves
Class AB2 Grounded Grid
Excellent IMD products
Soft-start circuit
Variable threshold level type ALC circuit
Matches modern HF equipment
INTRODUCTION The Ranger 811H linear amplifier is a high powered grounded
Grid linear with a tuned cathode input circuit. The amplifier is
designed around the much improved 811A valve.
Operation design is for the 1.8 3.5 7 10 14 18 21 24 28
MHz amateur bands.
RF UNIT This is a conventional high Q, Pi tank design which gives good
harmonic attenuation with very little through-loss of RF.
RF INPUT A separate tuned circuit is selected on each frequency band to
keep harmonics suppressed and to give your transceiver a good
50 ohm input load while driving the linear amplifier.
WiMo Antennen und Elektronik GmbH
Am Gäxwald 14, D-76863 Herxheim Tel. (07276) 96680 FAX 6978
http://www.wimo.com e-mail: info@wimo.com