WiMo RANGER 811H - Specifications

(6)
SECTION 5
SPECIFICATIONS
CIRCUIT
Class AB2 Grounded grid with tuned cathode input.
FREQUENCY COVERAGE
1.8 - 2.0 MHz
3.5 - 4.0 MHz
7.0 - 7.5 MHz
10.0-10.5 MHz
14.0-14.5 MHz
18.0-21.5 MHz
24.0-30.0 MHz
Covering all the WARC bands
MAINS SUPPLY
220 - 240 Volts AC, 50Hz
DRIVE POWER
0 - 100 Watts
RF OUTPUT - SSB
100W Drive = 800W output
40W Drive = 400W output
RF OUTPUT - RTTY
50W Drive = 300W RMS continuous
RF OUTPUT - CW
100W Drive = 800W
FRONT PANEL CONTROLS
Mains ON/OFF
Standby/Operate switch
Band change switch
ALC control
Tune control
Load control
RF set control
RF/Grid switch