Winchmax WM13500 - User Manual

Questions and Answers

L
Laura GarciaAug 6, 2025
Why Winchmax WM13500 Winches will not operate?
- R
  Robert NealAug 6, 2025
  If your Winchmax winch isn't operating, several factors could be at play. It might be due to loose, damaged, or corroded wiring; in that case, inspect all wiring and connections to ensure they're in good condition. The wireless or wired controls could be defective, so try testing with an alternative control system. Also, verify that the winch supply battery is adequate and matches the winch's voltage requirements. Lastly, the motor might have burnt out. To check, directly connect the motor and replace it if needed.
C
cheryl34Aug 12, 2025
What to do if my Winchmax WM13500 Winches motor runs extremely hot?
- M
  Meghan SavageAug 12, 2025
  If the motor of your Winchmax winch is running extremely hot, it could be due to a long period of operation. In this case, stop the operation and allow the unit to cool down. Another possible cause is weight overload, so you should reduce the load.
J
Jason GarciaAug 18, 2025
What to do if Winchmax WM13500 Winches runs in only one direction?
- P
  Patrick WilliamsAug 19, 2025
  If your Winchmax winch only runs in one direction, check for loose, damaged, or corroded wiring and ensure all connections are in good condition. Another potential cause is that the motor connection studs have been overtightened and snapped an internal weld, requiring you to replace the motor. Also, verify that the wander lead is correctly inserted into the control box socket and rotated to the lock position if it's a bayonet type.
J
Jessica PhillipsAug 25, 2025
What to do if Winchmax WM13500 load does not hold?
- A
  Abigail CobbAug 25, 2025
  If the load on your Winchmax winch isn't holding, first ensure that the free spool is engaged. If not, engage the free spool. Another reason could be a failed brake unit, in which case you should replace it. Lastly, check if the winch rope has come off the drum fixing and re-fix the rope to the drum if necessary.
C
Cynthia FergusonAug 30, 2025
Why Winchmax Winches runs in opposite direction?
- S
  Susan PerezAug 30, 2025
  If your Winchmax winch is running in the opposite direction, it could be due to reversed yellow and black terminal connections; in that case, swap the connections to the yellow and black terminals. Alternatively, the wireless receiver output wires might be connected in reverse, so swap those connections.