info@winchmax.co.uk Tel +44 (0) 1986899264
Possible cause Remedy
Winch will
not operate
corroded wiring
Either wireless or wired
Test using other control system
inadequate
matches winch
Motor has burnt out
and replace if required
Runs in only
corroded wiring
and snapped internal weld
Replace motor
Wander lead not correctly
connected
Check wander lead is correctly
Will not free spool Disengage free spool
Free spool not engaged Engage free spool
Brake unit has failed Replace brake unit
Winch runs in
Yellow and black terminal
Black terminals
Motor runs
cool down
Reduce load
Troubleshoong
the QR code shown here.
To Next Page