EasyManua.ls Logo

Winco ULPSS8B2W User Manual

Winco ULPSS8B2W
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
11075-00 60706-211
INSTALLATION AND
OPERATORS MANUAL
PACKAGED STANDBY
SYSTEM
ULPSS8B2W/E
Question and Answer IconNeed help?

Do you have a question about the Winco ULPSS8B2W and is the answer not in the manual?

Winco ULPSS8B2W Specifications

General IconGeneral
BrandWinco
ModelULPSS8B2W
CategoryPortable Generator
LanguageEnglish

Summary

SAFETY INFORMATION

ELECTRICAL SHOCK

The output voltage present in this equipment can cause fatal electric shock.

FIRE HAZARD

Natural gas and L.P. present a hazard of possible explosion and/or fire.

DEADLY EXHAUST GAS

Exhaust fumes from any gasoline engine contain carbon monoxide, an invisible, oderless and deadly gas.

NOISE HAZARD

Excessive noise is not only tiring, but continual exposure can lead to loss of hearing.

SPECIFICATIONS

GENERATOR

Details the model, wattage, voltage, amperage, frequency, phase, and RPM of the generator.

INSTALLATION

AC ELECTRICAL CONNECTIONS

DC ELECTRICAL INTERCONNECTION

DSE 3110 ENGINE CONTROL

PREVENTIVE MAINTENANCE

DSE 3110 CONTROL

FRONT PANEL CONFIGURATION

TROUBLESHOOTING TABLES

UNIT WILL NOT CRANK WHEN THE POWER FAILS.

Troubleshooting steps for when the unit fails to crank upon power loss.

ENGINE WILL NOT CRANK USING START BUTTON ON THE GENERATOR.

Troubleshooting steps for failure to crank using the generator's start button.

ENGINE CRANKS BUT WILL NOT START

Common causes and solutions when the engine cranks but does not start.

ENGINE STARTS AND THEN STOPS AND FAULT ICON COMES ON.

Diagnosing issues when the engine starts but stops with a fault icon.

ENGINE WILL NOT COME UP TO SPEED AFTER IT STARTS

Troubleshooting steps for engines that start but do not reach operating speed.

ATS PANEL WILL NOT TRANSFER TO EMERGENCY SUPPLY (GENERATOR).

Steps to diagnose why the ATS panel fails to transfer to the generator.

ATS PANEL WILL NOT PULL IN ON NORMAL POWER.

Troubleshooting when the ATS panel does not engage with normal power.

NO AC OUTPUT FROM GENERATOR

Diagnosing common causes for the generator producing no AC output.

Related product manuals