Need help?Do you have a question about the Wind Crest UIX2916S and is the answer not in the manual?
General warnings about using the fan and avoiding electrical hazards. Suitable for household cooking areas.
Guidelines to prevent range top grease fires by managing heat and cleaning the unit.
Steps to take to reduce injury risk during a range top fire, including evacuation and extinguisher use.
Safety measures for electrical installation, wiring, grounding, and venting to prevent fire and shock.
Warning against venting into spaces and requirement for metal ductwork only.
Importance of safety grilles/filters and manufacturer's disclaimer for proper use.
Requirements for qualified electricians, codes, grounding, supply, and circuit protection.
Components provided with the UIX2916S model.
Components provided with the UIX3816S model.
Specific items found in the hardware package, such as screws and wire caps.
Items the customer needs to purchase separately for installation.
Recommended minimum and maximum heights for installing the range hood above the cooking surface.
Specifies minimum round duct sizes for UIX2916S and UIX3816S models.
Strict warning against venting into spaces and requirement for metal ductwork.
Visual examples of common duct exit options like side wall and roof.
Emphasizes that all electrical work must be done by a qualified person and to turn off power before starting.
Details the required 120V 60Hz supply, grounded branch circuit, and protection methods.
Notes the potential requirement for a cable locking connector based on local codes.
Advises using at least two installers and performing dual blower conversion if needed.
Details cutting the cabinet opening, securing the insert, and removing the support screw.
Covers connecting ductwork, electrical wiring, and installing decorative or baffle filters.
Steps to disconnect and remove the single blower and prepare the dual blower plate.
Instructions for installing the dual blower, connecting wiring, and capacitor box.
Guidance on attaching the 8" or 10" round adapter to the insert for duct connection.
Important note regarding the removal of the damper from the single blower when using the dual blower kit.
Explanation of the slide control for turning the blower on/off and selecting speed levels.
Explanation of the slide control for turning lights on/off and adjusting brightness.
Proper methods and products for cleaning the hood's exterior surfaces without damage.
Instructions on cleaning mesh and baffle filters, including dishwasher suitability.
Step-by-step guide for removing decorative mesh filters (UIX2916S) and baffle filters (UIX3816S).
Cautionary notes about hot bulbs and ensuring power is off before replacement.
Instructions on how to remove the bulb by turning it counter-clockwise.
Information on the type and wattage of replacement bulbs required.
Common causes and solutions for the unit failing to power on or operate.
Troubleshooting steps when the lights work, but the motor does not turn.
Diagnosing and resolving issues related to excessive vibration of the range hood.
Solutions for when the motor operates but the lights do not turn on.
Identifying causes for poor ventilation and how to correct them.
Troubleshooting issues with the metal filter becoming loose or the spring clip breaking.
List of available replacement parts with their corresponding part numbers.
List of optional accessories, such as dual blower kits and liners, with part numbers.
Instructions on how to get service and what is required for warranty claims.
Details of the warranty coverage for defects in material and workmanship.
List of conditions and damages that are excluded from the warranty coverage.
General| Type | Wall Mount Range Hood |
|---|---|
| Number of speeds | 3 |
| Lighting | LED |
| Filter Type | Baffle |
| Venting Type | Ducted |
| Material | Stainless Steel |
| Noise Level | 65 dB |
To Next Page