EasyManua.ls Logo

Wind WD25TC-IN - User Manual

Default Icon
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SPLIT TYPE ROOM AIR CONDITIONER
OPERATION MANUAL
WD25TC-IN
WD35TC-IN
WD50TC-IN
WD71TC-IN
WD25TC-M
WD35TC-M
Please read this operation manual before using the air conditioner.
Keep this operation manual for future reference
This appliance is filled with R32.

Questions and Answers

Summary

Safety Precautions

General Safety Warnings

Essential safety guidelines for operating the air conditioner, covering usage and storage.

Parts and Functions

Indoor Unit Components

Identifies and describes the components of the indoor air conditioning unit.

Remote Controller Operation

Details the buttons and display functions of the remote control.

Display Board Explanation

Explains the indicators and displays on the indoor unit's control panel.

Outdoor Unit Components

Identifies and describes the components of the outdoor air conditioning unit.

Battery Installation for Remote

Step-by-step guide for loading batteries into the remote controller.

Operation

Basic Operation Guide

Covers starting the unit, selecting modes, setting temperature, and fan speed.

Emergency and Test Operation

Explains how to use emergency operation and conduct test operations.

Air Flow Direction Adjustment

Details how to adjust the vertical and horizontal louvers for airflow direction.

Advanced Operation Modes

Sleep Operation Mode

Describes the sleep mode functionality for cooling, dry, heat, and smart operations.

Turbo and Quiet Operation

Explains how to use Turbo for rapid heating/cooling and Quiet for silence.

Health Operation Mode

Details the health function, including anion generation for air purification.

Timer and Airflow Control

Timer On;Off Operation

Instructions for setting the timer to turn the unit on or off.

Healthy Airflow Adjustment

Guide to setting comfortable airflow positions for different modes.

Regulatory Compliance

European Regulations and Standards

Details compliance with European directives like RED, F-GAS, ENERGY, and RoHS.

Refrigerant Information

Refrigerant Type R32

Information on the R32 refrigerant, its GWP, and handling precautions.

Indoor Unit Installation

Required Tools and Power Source

Lists necessary tools and describes power source requirements for installation.

Selecting the Installation Location

Guidelines for choosing an appropriate place to install the indoor unit.

Indoor Unit Installation Steps

Mounting Plate Fitting and Wall Hole

Steps for fitting the mounting plate and positioning the wall hole for piping.

Piping Installation Methods

Describes left, other, and rear piping installation procedures.

Securing the Indoor Unit Body

Instructions for securely attaching the indoor unit to the mounting plate.

Connecting Electric Cables

Procedure for connecting indoor and outdoor unit electrical cables.

Installation and Testing Procedures

Electrical Cable Connection

Steps for connecting electrical cables to indoor and outdoor units.

Power Source and Piping

Details on power source setup and cutting/flaring piping work.

Drainage Installation

Ensuring proper installation of the drain hose for effective drainage.

Installation and Test Run Checks

Checklist for verifying correct installation and performing initial tests.

Maintenance

Smart Usage Tips

Advice on optimal room temperature, airflow, timer use, and remote controller care.

Air Filter Cleaning

Step-by-step guide on how to clean the air filter.

Air Purifying Filter Replacement

Instructions for replacing the standard and air purifying filters.

Cautions and Warnings

Installation Cautions

Important warnings and prohibitions regarding the installation process.

Operational Cautions

Precautions to follow during the operation of the air conditioner.

Troubleshooting Guide

Normal Performance Issues

Addresses common issues like delayed restart, noise, and smells during operation.

Multiple Check Points

Guides through checking filters, obstacles, temperature settings, and room conditions.

Operational Specifications

Ambient Temperature Range

Specifies the applicable ambient temperature ranges for cooling and heating.

Power Supply and Wiring Standards

Details power supply cord requirements and wiring method standards.

Wind WD25TC-IN Specifications

General IconGeneral
BrandWind
ModelWD25TC-IN
CategoryAir Conditioner
LanguageEnglish

Related product manuals