Wind WD25TC4-IN - User Manual

Wind WD25TC4-IN

36 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

SPLIT TYPE ROOM AIR CONDITIONER

OPERATION MANUAL

WD25TC4-IN

WD35TC4-IN

WD50TC4-IN

WD71TC4-IN

WD25TC4-M

WD35TC4-M

Please read this operation manual before using the air conditioner.

Keep this operation manual for future reference

This appliance is filled with R32.

Table of Contents

Questions and Answers

J
Jamie CarsonAug 6, 2025
Why is my Wind Air Conditioner cooling poorly?
- A
  Andrea HigginsAug 7, 2025
  Poor cooling in your Wind Air Conditioner can be due to several factors. Check if the air filter is dirty and clean it, normally it should be cleaned every 15 days. Ensure there are no obstructions blocking the inlet and outlet. Verify that the temperature is set correctly. Make sure all doors and windows are closed and that curtains are used to block direct sunlight. Also, consider if there are too many heat sources or people in the room.
K
Kimberly MontgomeryAug 12, 2025
Why is my Wind WD25TC4-IN Air Conditioner making noise?
- H
  Hunter JimenezAug 12, 2025
  Your Wind Air Conditioner may produce swishing or gurgling noises during operation or when it stops; this is the sound of refrigerant flowing in the system, most noticeable in the first few minutes after starting. A cracking noise can also occur due to the casing expanding or shrinking with temperature changes. However, if there's a loud noise from airflow, the air filter might be too dirty.
E
Edgar WoodAug 18, 2025
Why does my Wind WD25TC4-IN smell?
- B
  Brett NortonAug 18, 2025
  The Wind Air Conditioner might be circulating odors from the room, such as smells from furniture, paint, or cigarettes.
A
Aimee WilliamsAug 25, 2025
What to do if Wind WD25TC4-IN Air Conditioner does not restart immediately?
- R
  Rickey RussellAug 25, 2025
  When your Wind Air Conditioner is stopped, it includes a protective feature that prevents immediate restart for 3 minutes to safeguard the system. This protection circuit activates when the unit is turned off and also if the electric plug is pulled out and reinserted, ensuring the air conditioner's longevity.
N
Nichole SantanaAug 30, 2025
Why is my Wind WD25TC4-IN Air Conditioner blowing mist?
- J
  Jason MurphyAug 31, 2025
  During COOL or DRY operation, your Wind Air Conditioner may release mist due to the rapid cooling of indoor air.

Summary

General Warnings

Parts and Functions Overview

Loading of the Battery

Instructions on how to load batteries into the remote controller.

Operation Modes and Functions

Base Operation

Covers basic functions like unit start, mode selection, and temperature settings.

Emergency Operation and Test Operation

How to operate the unit in emergency situations or for testing purposes.

Air Flow Direction Adjustment

Instructions on how to adjust vertical and horizontal air flow direction.

Sleep Operation

Details the sleep mode functions for cooling, heating, and smart modes.

TURBO;QUIET Operation

Explains how to use TURBO for rapid heating/cooling and QUIET for silence.

HEALTH Operation

Information on the health function, including anion generator benefits.

Timer On;Off Operation

Guide to setting timer functions for turning the unit on or off.

Healthy Airflow Operation

How to set the healthy airflow function for comfort and air quality.

Compliance and Refrigerant Information

European Regulations Conformity

Details compliance with European directives and regulations for the product.

Refrigerant Information

Key details about the R32 refrigerant, its properties, and handling precautions.

Indoor Unit Installation

Installation Tools

List of tools required for the installation of the indoor unit.

Power Source Requirements

Guidance on electrical power source requirements and installation.

Installation Place Selection

Recommendations for choosing the optimal location to install the indoor unit.

Mounting Plate Fitting

Steps for fitting the mounting plate and marking wall hole locations.

Wall Hole and Piping Cover

Procedure for drilling the wall hole and installing the piping hole cover.

Piping Installation Methods

Details on rear, left-rear, and other direction piping installation for the unit.

Unit Body Installation and Wiring

Steps for fixing, unloading, and connecting the indoor unit body and wiring.

Connecting Cable After Indoor Unit Installation

Procedure for connecting the electrical cable after the indoor unit is installed.

Connecting Cable Before Indoor Unit Installation

Procedure for connecting the electrical cable before the indoor unit is installed.

Power Source Installation Details

Specifics on exclusive power source usage and circuit breaker installation.

Piping Cutting and Flaring

Instructions on pipe cutting, burs removal, and flaring work.

Drainage Installation

Guidance on proper drain hose installation to ensure effective drainage.

Installation and Test Run Checks

Checklist for verifying installation and performing a test run of the unit.

Maintenance and Smart Use

Smart Use and Maintenance Tips

Guidelines for smart operation, cleaning, and effective use of the air conditioner.

Air Purifying Filter Replacement

Detailed steps for opening the grille, detaching, attaching, and closing the air filter.

Cautions and Prohibitions

Troubleshooting and Specifications

Troubleshooting Common Issues

Identifies common phenomena and their causes or check points for resolution.

Operating Specifications

Details applicable ambient temperature ranges for cooling and heating operations.

Wind WD25TC4-IN Specifications

General

Brand	Wind
Model	WD25TC4-IN
Category	Air Conditioner
Language	English

Related product manuals

Wind WD25TC5-IN

Wind WD35TC4-IN

Wind WD35TC5-IN

Wind TC4 de 2700