To Next Page
K
Kendra HartAug 7, 2025
Why does my Wind WD25TC5-IN smell?
- MMichael PinedaAug 8, 2025
The Wind Air Conditioner might circulate smells from the interior air, such as furniture, paint, or cigarettes.
Why does my Wind WD25TC5-IN smell?
The Wind Air Conditioner might circulate smells from the interior air, such as furniture, paint, or cigarettes.
Why is my Wind WD25TC5-IN making noise?
Your Wind Air Conditioner may produce swishing or gurgling noises due to refrigerant flowing in the system, especially noticeable in the first 2-3 minutes after start. Cracking noises can occur as the casing expands or shrinks with temperature changes. A big noise from airflow may indicate a dirty air filter.
How to restart Wind Air Conditioner immediately?
When the Wind Air Conditioner is stopped, it won't restart immediately until 3 minutes have elapsed to protect the system. If the electric plug is pulled out and reinserted, the protection circuit will work for 3 minutes.
Why can't I change the fan speed in dry mode on my Wind WD25TC5-IN Air Conditioner?
In DRY mode, when the room temperature is lower than the temperature setting +2°C, the Wind Air Conditioner will run intermittently at LOW speed regardless of the FAN setting.
Essential safety guidelines and warnings to follow before operating the unit.
Visual representation of the Wi-Fi system components and their interaction.
Requirements for mobile phones and routers to use the Wi-Fi function.
Steps to download and set up the mobile application for Wi-Fi control.
Identification and description of parts on the indoor unit.
Details of buttons and functions on the remote control.
Identification of parts on the outdoor unit.
Instructions on how to load batteries into the remote controller.
How to turn on the unit and select operating modes like COOL, HEAT, DRY.
Adjusting temperature settings and fan speed for optimal comfort.
Procedures for emergency running and test operation of the unit.
How to adjust the vertical flap and swing function for airflow direction.
How to activate and use the sleep mode for temperature adjustment.
Using Turbo for rapid heating/cooling and Quiet for silence.
Activating the health function and anion generator for improved air quality.
Setting on/off timers for automatic operation of the air conditioner.
Adjusting airflow direction for optimal comfort and air circulation.
Compliance of the product with relevant EU directives and standards.
Details on the refrigerant used (R32) and important handling precautions.
Necessary tools for installation and criteria for selecting the installation place.
Diagrams illustrating the indoor unit and piping arrangement for installation.
Fixing the mounting plate and preparing the wall hole for piping.
Routing pipes, drain hose, and electric cables for connection.
Securing the indoor unit body to the mounting plate and unloading procedure.
Instructions for removing the wiring cover to access connections.
Detailed steps for connecting electrical cables between indoor and outdoor units.
Proper installation of the drain hose to ensure effective water drainage.
Guidelines for connecting the air conditioner to the power supply.
Steps for cutting and flaring refrigerant pipes for proper connection.
Checks and procedures for testing the unit after installation.
Recommendations for efficient and effective use of the air conditioner.
Instructions for cleaning the air filters to maintain performance.
Important warnings regarding the installation process to prevent hazards.
Precautions to take during operation to ensure safety and prevent damage.
Common phenomena and their potential causes or checks before service.
Systematic checks for common issues like poor cooling or fan speed problems.
Applicable indoor and outdoor temperature ranges for cooling and heating.
Details on power supply, fuses, wiring, and battery disposal.
General| Brand | Wind |
|---|---|
| Model | WD25TC5-IN |
| Category | Air Conditioner |
| Language | English |
