WINDONE K2 - Remove the Battery; How to Charge the Battery

6. Remove the Battery
1. Turn the key counterclockwise to the left to the UNLOCK icon.
2. Carefully slide the battery forward and lift it off the frame.
1
2
7.How to Charge the Battery
Your electric bike will be fully charged when the LED light on the charger changes from red (charging)
to green (fully charged).
After reaching full charge, it will automatically stop charging.Even so, we still don't recommend charging your
electric bike for an extended period.
Do not connect the charger if the charging port is wet. Remember to cover the charging port when not in use.
To check the battery level without turning on the bike, press
and hold the button located on the top of the battery for a
few seconds.The current capacity of the battery will be
displayed.