Windsor Clipper CLP12 User Manual

ACCESSORY TOOL USAGE
CLIPPER 98630 12/14/98
13
Turn on vacuum motor switch and
set solution switch to intermittent
position. Note: Be sure brush switch
is in off position and brush is in
storage position.
Squeeze handle on accessory tool
to begin cleaning.
STEP
3
STEP
4
STEP
1
STEP
2
Use only one of the following
acceptable accessory tools.
CST DDH DH DHT UPH-3
SW SW-PRO SFW 39504
Pull back collar and insert over
machine mounted fitting, then
release collar to lock into place.
Lift door on front of vacuum shoe
and insert 1 ½ inch hose cuff into
hole.
SOLUTION
VACUUM
ON
OFF
INT
BRUSH

Windsor Clipper CLP12 Specifications

General

Brand	Windsor
Model	Clipper CLP12
Category	Floor Machine
Language	English