MAINTENANCE
Clipper
WINDSOR
01)
Drain recovery tank and
solution tank.
05)
inspeCt brush:
When the black
brush bristles reach the height
of the yellow indicator bristles
replace the brush.
04)
Clean the brush and
vacuum shoe.
02)
Rinse and clean recovery tank.
06)
Store brush in the recovery
tank with the bearing side
up and vent the recovery
tank dome to let dry.
03)
Clean the oat shut off.
07)
Soak spray jets in a solu-
tion of water and vinegar
overnight.
To Previous Page
Loading...
