21
Maintenance
Daily Maintenance
1. Unplug power cord.
2. Shake down the contents of the bag daily.
3. Check power cord for damaged or frayed insula-
tion.
4. Check for and remove any lint or debris around
brush and brush housing.
Regular/periodic Maintenance
1. Unplug power cord.
2. Every 4 to 6 months remove wheels, clean axles,
and apply a thin coat of silicone lubricant to axles.
3. Inspect and clean vac motor filters.
4. Periodically inspect all hoses, electrical cables,
filters, gaskets and connections on your machine.
Frayed or cracked hoses should be repaired or
replaced to eliminate vacuum loss.
5. The electrical cable must be well insulated, if the
cable insulation is broken or frayed, repair or
replace it immediately. Don't take chances with
electrical fire or shock.
86400820 Operators Manual - NuWave
To Next Page
Loading...
