Why does my WingScapes BirdCam WSCA02 take too many photos in AUTO mode?
If your WingScapes Scouting Camera is taking too many photos or videos in AUTO mode, you should try decreasing the #PHOTOS/EVENT setting. Alternatively, you can increase the DELAY setting or decrease the SENSITIVITY setting.
How to fix WingScapes BirdCam WSCA02 Scouting Camera taking too few photos in AUTO mode?
If your WingScapes Scouting Camera is taking too few photos or videos in AUTO mode, ensure the camera is aimed properly without obstructions between the target and the infrared sensor. You might also decrease the DELAY setting, increase the #PHOTOS/EVENT setting, increase the SENSITIVITY setting, or decrease the distance between the camera and your target.
What to do if WingScapes BirdCam WSCA02 takes too many empty images in AUTO mode?
If your WingScapes Scouting Camera captures an unusually high number of empty images in AUTO mode, consider these adjustments: * Decrease the SENSITIVITY setting. * Decrease the #PHOTOS/EVENT setting. * Position the camera to minimize the open area behind the target, such as aiming at a feeder against a wall or seed on the ground. This reduces ‘fly-by’ triggers.
General| Brand | WingScapes |
|---|---|
| Model | BirdCam WSCA02 |
| Category | Scouting Camera |
| Language | English |
Provides essential contact details via phone, fax, and email for support.
Lists company website, social media, and galleries for user engagement.
Step-by-step instructions for quick BirdCam setup and activation.
Explains the automatic operational sequence after the BirdCam is turned on.
Lists all components provided with the BirdCam.
Explains the two types of memory for storing images and their accessibility.
Details battery requirements, installation, and expected operational life.
Explains how the light-sensitive photocell manages device operation based on ambient light.
Provides essential advice for ideal placement, aiming, and environmental factors.
Suggests placing the BirdCam on the ground near bait for ground-feeding birds.
Describes attachment to trees or posts using the provided stretch cords.
Details attaching the BirdCam to a camera tripod for stability and adjustability.
Advice on using the BirdCam indoors to capture outdoor scenes through glass.
Explains the use of an optional accessory for mounting on feeder poles.
How to enter the menu to select operational modes.
How to cycle through AUTO, MANUAL, and TIMELAPSE options.
How to activate the chosen operating mode.
Procedure to access the camera's detailed configuration settings.
How to move between different configuration options.
How to adjust the parameters for each setting.
Procedures for confirming changes and leaving the setup menu.
Explains how to reset all settings to their original factory state.
Setting to determine whether the BirdCam captures photos or short videos.
Controls the time interval between captured events or detection periods.
Configures how many photos or videos are taken per trigger event.
Adjusts the sensitivity of the motion detection sensor for optimal performance.
Option to add metadata like date, time, and camera name to captured images.
Selects the video signal format for TV output based on region.
Controls how the flash unit operates in different lighting conditions.
Procedure to permanently delete all stored photos and videos from memory.
Runs a test to verify the BirdCam's hardware and software functionality.
Instructions for activating the automatic motion-triggered capture mode.
Steps to stop the BirdCam's operation in AUTO mode.
Instructions for activating the mode for manual photo capture.
Steps to stop the BirdCam's operation in MANUAL mode.
Instructions for activating the mode for time-interval based capture.
Steps to stop the BirdCam's operation in TIMELAPSE mode.
Connects the BirdCam to a TV for reviewing captured photos and videos.
Transfers photos and videos from BirdCam to a computer via USB.
Retrieves images from an SD card using a separate card reader.
Information on how to get further assistance for BirdCam problems.
Addresses common issues like capture frequency and image quality.
Tips and settings adjustments to minimize capturing empty frames.
Guidance on resolving photos that appear too dark or too light.
Instructions for executing a system diagnostic to check functionality.
Details optional accessories for physically mounting the BirdCam to various surfaces.
Describes optional power accessories for extended or alternative operation.
Details the safety specifications and compliance for the laser aiming device.
To Next Page
