Winix C610 - User Manual

WHERE TO USE
12~18 in12~18 in12~18 in12~18 in
12~18 in12~18 in
Allow 12 ~ 18 in. of space between TVs, radios, and other
electronics. Electromagnetic interference from certain
electronics may cause product malfunction.
Place indoors away from direct sunlight. Direct exposure
may cause product malfunction or failure.
Only place on hard, flat surfaces. Flimsy or slanted surfaces
may result in abnormal noise and vibrations.
Allow at least 12 ~ 18 in. from walls for maximum air flow
FRONT
PACKAGE CONTENTS
BACK
Control Panel
Base
Unit
Wi-Fi Setup Guide
User
Manual
360º All-in-One
True HEPA Filter(2)
Power Plug
Air Outlet Vent
Smart Sensor
MODEL PART DIAGRAM
* For a Certified Refurbished Air Purifier, there will be 1 360º All-in-One True HEPA Filter included; equivalent to a 1-year
supply.
When to Replace Filters
Filter Indicator Light When to Service When to Replace
360º All-in-One
True HEPA Filter
Clean once every
14 days
Lasts Approx.
12 months
• When the Check Filter indicator LED is on, it is time to replace the 360º All-in-One True HEPA Filter.
• Intervals between filter replacement may vary depending on environment.
MAINTENANCE
CLEANING CARE
Cleaning the Filters:
Clean with a vacuum or a soft brush.
• Only clean the Pre-Filter.
• This filter
cannot
be washed.
• Intervals between filter cleaning may vary depending on
the air quality.
Cleaning the Exterior & Interior:
Wipe with a soft damp cloth using room temperature
water.
• Afterwards, wipe it down with a dry cloth.
Open the front panel and clean the interior with a vacuum
cleaner.
• For optimal performance, clean every 1-2 months.
NOTICE
• When cleaning the unit, always unplug the power cord
first and then wait until the unit has cooled down.
• Never disassemble, repair, or modify this unit yourself.
• Do not use flammable sprays or liquid detergents.
• Do not allow children to clean or maintain the unit.
• Before cleaning or maintaining, ensure unit is unplugged.
• Do not use benzene, alcohol, or other volatile fluids,
which may cause damage or discoloration
.
SPECIFICATIONS
Model
C610
Voltage
AC 120 V / 60 Hz
Power Rate
45W
Dimensions
10.42" W × 10.42" D × 18.54" H
Weight
8.35 lbs
Filter SKU Filter Z: 1712-0121-00
Exterior design, and product specifications may be changed
without prior notice to improve product performance.
NOTICE
Cracks on both ends of the half-folded filter are not defects.If you spread it out and
assemble it into a cylindrical shape, you will have a problem-free shape.
Contact Winix for product related inquiries and customer service
• Dedicated Call Center: (877) 699-4649
• Website: www.winixamerica.com
To expedite service, please specify the model name and number, the nature of the problem, your
contact information, and your address.
For Troubleshooting or Frequently Asked Questions, please visit: https://winixamerica.com/faq/
01. Filter Reset Button / Indicator
• After replacing the 360º All-in-One True HEPA Filter,
press and hold the Filter Reset Button for at least
5seconds until the Filter Replacement Indicator turns
off.
• LED light indicates when it is time to change the filter.
02. Light Mode Button
Use the light button to set the desired display brightness.
The display brightness cycles in the order of 100%
→
70%
→
30%
→
OFF. Other features remain unchanged.
03. Fan Speed Indicator Buttons
Indicates the current fan speed.
• Use the Fan Speed arrow buttons to set the desired fan
speed. Fan speeds cycle over in this sequence:
Auto, Low, Medium, High, Turbo, Sleep
04. Child Lock Button / Indicator
• Child Lock Button for 3 seconds, Child Lock will be
initiated and the buttons will not operate. A chime will
sound if pressed. To cancel, press the child lock button
for 3 seconds.
• LED light indicates whether Child Lock mode is enabled
or disabled.
05. Power Button
Turns the unit on or off. During the first 30 seconds of
power, the Air. Quality Indicator will cycle through Blue,
Green, Amber and Red colors.
• Smart Sensor takes approximately 30 seconds to
detect the air quality in the environment before normal
operation begins.
06. Wi-Fi Pairing Button / indicator
• A quick press will turn Wi-Fi on/off.
• A long press of 3 seconds will activate pairing mode.
• A Wi-Fi indicator will display on the front while Wi-Fi is
active.
• Indicates whether Wi-Fi Mode is enabled or disabled.
07. Light Sensor
Detects the amount of ambient light in the environment.
When in Auto Mode, the light sensor detects when to put
the unit into Sleep Mode.
08. Air Quality Indicator
Color coded LED light indicates one of four levels of Air
Quality : Red (poor), Amber (fair), Green (average) and
Blue(good).
09. PlasmaWave
®
Button / Indicator
• Enables or disables PlasmaWave
®
When the unit is running, you may hear a chirping or
buzzing sound. The sound is from particles passing
through. PlasmaWave
®
, it is normal and does not signify
product failure. Press the PlasmaWave
®
Technology
button when the unit is on to enable or disable this
feature.
• Indicates whether PlasmaWave
®
is enabled or disabled.
10. Mode Indicator
Indicates whether Auto & Fan Speed Mode is enabled or
disabled.
Low Medium High Turbo
11. Sleep Mode Indicator
Indicates whether Sleep Mode is enabled or disabled.
CONTROL PANEL
03 03
10
11
01
02
04
05
09
06
07
08
4-STAGE AIR PURIFICATION
Air Purification means it
removes inanimate particles
Activated Carbon Filter
Fine Mesh Pre-Filter
True HEPA Filter
PlasmaWave Technology
INITIAL OPERATION
01. Turn the product upside down.
02. Grab the handle at the bottom of the product, turn
counter clockwise, and pull out the filter cover.
03. Turn the upper
cap
of the filter counter clockwise
to separate it.
04. After disassembling the filter cover, remove the
protective vinyl in the filter.
05. After reassembling the filter, close the filter cover.
(When assembling the filter cover, insert it
according to the direction of the square hole)
06. Assemble the filter top cap by turning it
clockwise.
07. After installing the filter, turn the handle clockwise
to close the filter cover.
08. Return the product to an upright position and
resume normal operation.
01
04
06 07 08
05
02 03
REPLACING FILTERS
1712-0121-00
Resetting Filter Life:
After replacing the 360º All-in-One True HEPA Filter While the unit is on, hold the Filter Reset
Button for at least 5 seconds until you hear the beep. After the beep, the Filter Replacement
Indicator will disappear.

Winix C610 Specifications