Do you have a question about the Winix HEPA 5500 and is the answer not in the manual?
Type | Air Purifier |
---|---|
CADR (Smoke) | 232 CFM |
CADR (Pollen) | 246 CFM |
Noise Level | 27.8 dB |
Dimensions | 15 x 8.2 x 23.6 inches |
Weight | 15.4 lbs |
Filtration Stages | 3-Stage |
Auto Mode | Yes |
Sleep Mode | Yes |
Odor Sensor | Yes |
PlasmaWave Technology | Yes |
Fan Speeds | 4 |
Power Consumption | 70 W |
Filter Life | Up to 12 months |
Filter Type | HEPA |
Filtration Technology | True HEPA |
Room Size | 360 sq ft |
Follow instructions to reduce risk of electric shock, short circuit, and fire.
Do not block vents, use near hot objects, do not use on side, keep away from oily products.
Digital sensor monitors air quality, automatically adjusts fan speeds.
Simple and economical maintenance, wash HEPA filter, change carbon filter.
Air undergoes three separate processes for purification.
Indicator illuminates when to replace the Washable HEPA Filter.
Explains Auto and Sleep modes for unit operation.
Shows the current level of air quality in your room.
Automatically monitors air quality and adjusts fan speed.
Unit defaults to auto, senses air quality and adjusts fan speed.
Switch to manual mode using remote or unit buttons.
Shows air quality levels (Green, Orange, Red) and auto compensation.
Panel lights dim, unit operates quietly at low fan speed.
Proper and poor conditions for effective remote control operation.
Buttons to adjust fan speed, switch modes, and activate Turbo.
Button to turn the PlasmaWave™ generator on or off.
Turns the unit on/off; switches to auto operation by default.
Steps to clean the HEPA filter with water.
How to clean the exterior unit with dry or damp cloth.
Step-by-step guide for replacing HEPA and Carbon filters.
Steps to reset the indicator after filter replacement.
Provides solutions for radio/TV interference caused by the unit.
Solutions for when the remote control fails to operate.
Addresses issues with the unit producing smoke or odors.