Need help?Do you have a question about the Winix HR1000 and is the answer not in the manual?
General| Type | Air Purifier |
|---|---|
| Power Consumption | 70 W |
| Auto Mode | Yes |
| Sleep Mode | Yes |
| Number of Fan Speeds | 4 |
| Filter Replacement Indicator | Yes |
| CADR (Dust) | 300 cfm |
| Filtration System | True HEPA filter, Activated carbon filter |
| Noise Level | 27.8 dB - 54.8 dB |
| Dimensions | 23.6 inches |
| Filter Life | 12 months |
| Features | Air Quality Indicator, Smart Sensors |
Explanation of the main buttons for controlling the air purifier: Power, Mode/Fan Speed, Timer/Air Quality, and PlasmaWave®/Child Lock.
Recommendations for optimal placement, required space, and suitable surfaces for the air purifier.
Critical warnings regarding installation location, avoiding direct sunlight, and environmental factors.
Step-by-step instructions to remove the front panel and the unit's filters.
Steps to correctly install the new Pre-filter, CD Carbon filter, and HEPA filter in sequence.
Guidance on when to service and replace the air purifier filters based on indicator lights.
Essential safety instructions for operating the air purifier to avoid damage and ensure safe use.
Precautions related to the power cord, plug, electrical connections, and submersion in water.
Steps to plug in the unit and press the power button to begin operation.
Safety guidelines for unplugging, cooling, and avoiding specific cleaning agents.
Actions to take if the air purifier does not power on, checking power outage and connections.
Actions for a hot power plug or outlet, ensuring secure connection.
To Next Page
