To Next PageTo Next PageWhy is my Winix Air Cleaner not removing odors effectively?
Your Winix Air Cleaner might not be removing odors effectively because the AIR QUALITY sensor is blocked or clogged. Ensure it's clear. Also, consider moving the unit closer to where the odors are strongest. The filters may also need replacing, as they could be full of pollutants.
Why is the air quality indicator on my Winix Air Cleaner orange or red when the air seems clean?
If the AIR QUALITY LEVEL indicator on your Winix Air Cleaner is orange or red even when the air seems clean, the AIR QUALITY sensor may be blocked or clogged. Try clearing the sensor with a vacuum cleaner.
How to reset the filter indicator on a Winix Air Cleaner?
If the CHECK FILTER indicator remains lit on your Winix Air Cleaner after replacing the filter cassette, gently insert a paper clip into the RESET FILTER button hole. Hold it for 3-5 seconds until you hear a beep, which indicates the unit has been reset.
Why is my Winix WACU300 Air Cleaner not removing smoke?
If your Winix Air Cleaner isn't removing smoke and odors, make sure the sensor isn't blocked or clogged. Also, the filters may need replacement.
What to do if my Winix Air Cleaner interferes with radio reception?
If your Winix Air Cleaner interferes with radio or television reception, try the following: 1. Reorient or relocate the receiving antenna. 2. Increase the distance between the equipment and the air cleaner. 3. Connect the air cleaner to an outlet on a different circuit than the equipment. If the problem persists, consult an experienced television/radio technician.
Why does the remote control for my Winix Air Cleaner not work?
If the remote control for your Winix Air Cleaner isn't working, first ensure the battery is inserted correctly. If it still doesn't work, replace the battery. Also, make sure the remote control has a clear line of sight to the air cleaner.
General| Model | WACU300 |
|---|---|
| Pre-filter | Yes |
| Activated Carbon Filter | Yes |
| Auto Mode | Yes |
| Sleep Mode | Yes |
| PlasmaWave Technology | Yes |
| Air Quality Sensor | Yes |
| Type | Air Purifier |
| Filter Type | HEPA |
| Noise Level | 27.8 dB |
| Filtration | 3-stage |
| Warranty | 2 years |
| Filtration Technology | Activated Carbon |
