EasyManua.ls Logo

Winkhaus AV2 User Manual

Winkhaus AV2
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Winkhaus AV2 / AV2 E Automatic
Locking System
Fabrication and Installation Manual
Timber and Composite doors
Question and Answer IconNeed help?

Do you have a question about the Winkhaus AV2 and is the answer not in the manual?

Winkhaus AV2 Specifications

General IconGeneral
Automatic LockingYes
Locking TypeMulti-point locking
SecurityHigh
MaterialSteel
Locking MechanismHook
FinishSilver
CompatibilityCompatible with various door types

Summary

Fabricator Manufacturing Procedure

Sash and Frame Preparation

Preparation steps for sash and frame, including marking and routing.

Hardware Installation

Steps for installing the lock and door leaf into the frame.

Fabrication Final Checks and Adjustments

Final checks and adjustments for the fabricated door set.

Installation Procedures

Installation Set Up

Initial setup procedures for door installation, checking plumb and parallel.

Glazing, if applicable

Guidance on glazing procedures, including toeing and heeling.

General Door Set up

General setup for the door, focusing on centre lines and air gaps.

Installation Checks and Adjustments

Final checks and adjustments after door installation.

Operating Instructions

Routine Maintenance

Trouble Shooting Guides

AV2 Locking System (Automatic/Manual)

Troubleshooting common issues for the AV2 automatic/manual locking system.

AV2 E Locking System (Electromechanical)

Troubleshooting common issues for the AV2 E electromechanical locking system.

Frame Routing Details

F24 AV2 Keeps: Full Length (3 Piece)

Detailed diagrams and specifications for frame routing of full-length keeps.

F24 AV2 Keeps: Single Pocket

Detailed diagrams and specifications for frame routing of single pocket keeps.

F24 AV2 Keeps: One Piece Full Length Rounded End

Detailed diagrams for frame routing of one-piece full-length rounded end keeps.

Sash Routing Details

AV2 & AV2 E 20mm Face Plate

Diagrams for sash routing details for 20mm face plates on AV2 and AV2E.

AV2 & AV2 E 20mm Rounded End Face Plate

Diagrams for sash routing for 20mm rounded end face plates on AV2 and AV2E.

AV2 & AV2 E 16mm Face Plate Full Length

Diagrams for sash routing for 16mm face plates on AV2 and AV2E.

EC Declaration of Conformity

Related product manuals