Winmate M133 Series - User Manual

Please read these instructions carefully before using this product, and save this manual for future use.
Rugged Tablet PC
M133 Series
Windows 10 IoT Enterprise
Windows Embedded 8.1 Industry Pro
Windows 7 Professional for Embedded System
OS Deployment Guide
Version 1.1
Release date: 17-Apr-2017

Summary

Chapter 2: BIOS

Changing BIOS Mode for OS Installation

Procedures for switching between UEFI and Legacy BIOS modes for OS installation.

Changing BIOS Settings to Install OS

Step-by-step guide to modify BIOS settings for OS installation, including OS version switches.

BIOS and EC Firmware Update Guide

Instructions for updating BIOS and EC firmware using a USB drive.

Chapter 3: Setting Up OS First Time

Windows 10 IoT Enterprise OS Installation

Guide for installing Windows 10 IoT Enterprise on the tablet.

Windows Embedded 8.1 Industry Pro OS Installation

Windows 7 Ultimate;Professional OS Installation

Chapter 4: Driver Installation

Windows 10 IoT Enterprise Driver Installation

Sequence and procedure for installing drivers for Win 10 IoT.

Windows Embedded 8.1 Industry Pro Driver Installation

Sequence and procedure for installing drivers for Win 8.1.

Windows 7 Professional Driver Installation

Sequence and procedure for installing drivers for Win 7, including Sensor Hub driver.

WMMIO Driver Installation (Windows 7;8;10)

Chapter 6: Serial COM Port Settings

COM Port Settings Overview

Adjusting COM Port Numbers

Setting Up Bluetooth COM Port

Chapter 7: OS Setting Adjustments

Winmate M133 Series Specifications

General

Display Size	13.3 inches
Display Type	TFT LCD
Resolution	1920 x 1080 pixels
Camera Front	2MP
Processor	Intel Core i5/i7
RAM	8GB/16GB
Storage	128GB/256GB/512GB SSD
Operating System	Windows 10
I/O Ports	USB 3.0, Audio Jack
Ruggedness	IP65