The DPS is compatible with slings of the type “clip slings” as
seen on the right.
All 4 attachment points must be used to ensure the right
stability of the DPS.
Make sure all 4 clip fixings are mounted correctly on the
attachment points before carrying out a lift.
If in doubt contact Winncare Nordic for assistance choosing
the right sling.
3.2 Bed to chair
When lifting a patient from a bed the DPS should be
positioned in the lying position.
For a smooth transfer, the caregiver can use the bed’s
adjustment functions if available.
Position the patient in a semi-supine position and adjust the
DPS to place the patient in the best position. Doing this
allows easier access to the patient.
3.3 Chair to bed
When lifting a patient from a chair or similar the DPS
should be positioned in the sitting position.
If it is a wheelchair with an anti-tilt function, this can be
used to position the patient.
The DPS can be activated while attaching the sling to allow
easier access to the rear attachment points.
To Next Page
Loading...