9-3
SECTION 9 –
FURNITURE AND SOFTGOODS
3. Arrange dinette cushions to cover bed area.
Bed to Dinette
1. Reattach the table onto the wall support and
lower the table leg.
2. Make sure that the table leg is secured into the
floor support bracket and the leg brace is
locked.
COMFORT SOFA SLEEPER
–If Equipped
(Typical View)
Sofa to Bed
1. Remove sofa back cushions.
2. Using the pull strap (attached to the back side
of the sofa), pull the sofa back out and extend
all the way down to the floor.
Table
Bracket
Wall
Support
To Next Page
Loading...
