Winnebago Impulse - Flip-Down Screen Video Players

SECTION 8 –
ENTERTAINMENT
8-4
• The TV screen will display
the DVD player logo when
the correct input is selected.
Play DVD
• Insert DVD into player. DVD will begin to
load automatically. TV screen will typically
show “READING” or “LOADING”.
• The DVD may load directly to the main title/
menu screen or it may begin to play previews.
You may be able to skip previews if desired by
pressing the NEXT button until you see the
main menu screen.
• When the main menu screen appears, use the
arrow buttons on the DVD remote to select the
desired entry or press the ENTER or PLAY
buttons on the remote (or “Play” button on
DVD player) to begin playing the feature.
• Volume is adjusted with the DVD remote (or
volume buttons on DVD player).
FLIP-DOWN SCREEN VIDEO
PLAYERS
(Rear Bunk models only)
–If Equipped
The flip-down LCD screen DVD Video
Players are mounted overhead in each of the bunk
beds.
The Video Players operate independently so
the occupant of one bunk may watch a DVD
while the other watches a different DVD. The
same DVD can be watched on both players at the
same time as well. The top player is the master
unit. Place the DVD in the top player and begin
playing the DVD. Select AV1 input on the unit in
the lower bunk to view the DVD playing in the
upper bunk.
The players each contain auxiliary audio-
video inputs for connection of a video game
system or other audio-video equipment if
desired.
Remote Control and Wireless
Sound
• A sensor array
above the
screen of each
Video Player
receives command signals from the remote
control.
• The sensor array also continuously transmits
wireless sound signals for reception on IR
wireless headphones.
• See Video Player instruction guide in your
InfoCase for remote control instructions and
additional information on wireless
headphones.
MENU
ENTER
NEXT
ENTER
T/F
ENTER
PLAY/
PAUSE
P
O
W
ER
AV
MENU