To Next PageTo Next Page
Need help?Do you have a question about the Winnov Videum 1000 Plus and is the answer not in the manual?
Details features and specifications of the Videum 1000 Plus capture card.
Details the professional capture card with a rackmountable breakout box.
Describes the capture card with a breakout cable for professional use.
Lists key features of the Videum 4100 capture card, including capture performance and system support.
Details capture capabilities, performance, and system features of the Videum 4400.
Explains the function and usage of 75 Ohm termination jumpers for video inputs.
Provides step-by-step instructions for connecting the watchdog reset cable.
Step-by-step guide for installing a Videum board into a computer.
Instructions for connecting analog color video cameras to the Videum 1000 Plus.
Guidance on connecting cameras to the Videum 1010 Plus using MXC input.
Procedure for installing Videum software on Windows NT 4.0 with Service Pack 6a.
Steps for plug-and-play software installation on Windows 2000 and XP.
Guides on connecting video sources and using the configuration utility for the breakout box.
Steps for configuring board settings and customizing video source names.
Guide to setting image dimensions, data format, and compression.
Configuration options for video capture, including device selection and frame rate.
Configuration options for audio capture, including sample rate and file naming.
Instructions for capturing snapshots at intervals to create a time lapse movie.
Guides on capturing frames one at a time for stop motion animation.
Setting the default video input and associating an audio source.
Adjusting video settings like brightness, contrast, hue, and advanced capture options.
Controls for zooming, panning, tilting, and adjusting image properties of your camera.
Instructions for independently adjusting all four audio channels and their levels.
Setting the countdown timer for system reboots after detecting a hang.
Enabling the watchdog function and checking its operational status.
Locating failure logs and performing a test to verify watchdog functionality.
Steps for setting lines as input/output, enabling events, and defining actions.
Setting up the server to allow remote camera control during video conferencing.
Resolves issues with black video windows, scrambled video, or incorrect application display.
General