To Next PageTo Next Page
Need help?Do you have a question about the Winterhalter Gastronom GS 640 and is the answer not in the manual?
General| Brand | Winterhalter Gastronom |
|---|---|
| Model | GS 640 |
| Category | Washer |
| Language | English |
Explains warning symbols and initial safety advice for the utensil washer.
Covers safe use of detergents, preventing rust, frost protection, and electrical safety.
Details the On/Off switch, indicator lamps, and self-cleaning button.
Covers programme buttons, special programmes, and their activation area.
Explains the boiler and tank temperature displays on the operating panel.
Describes the automatic program steps including washing, dripping off, and rinsing.
Details the different wash programmes available and their intended use.
Covers turning on water, checking detergent/rinse additive levels, and filter installation.
Explains how to start the machine, the heating process, and status indicators.
Provides guidance on manual detergent pre-dosage and a dosage table.
Details manual detergent addition frequency and procedure for changing detergent types.
Instructions on how to load various types of wash items, including placement and orientation.
Steps for selecting a wash programme, starting the machine, and monitoring its progress.
Guidance on removing items, checking cleanliness, and performing basic filter maintenance.
How to activate the button area for special programmes and view temperatures.
Steps to select short or intensive programmes based on soiling levels.
Explains the indicator lights on the operating panel during programme selection and execution.
Procedure for switching between different special programmes on the operating panel.
Steps to revert from a special programme back to the normal programme.
Details the process for tank drainage and the automatic self-cleaning function.
Instructions for safely shutting down the machine, including closing the water valve and main switch.
Procedure for removing, cleaning, and re-inserting basket, flat, and drainage filters, and checking wash arms.
Guidance on cleaning the outer walls and interior of the utensil washer.
Steps for performing descaling to remove scale buildup and maintain performance.
Explains how faults are displayed, lists common faults, their causes, and remedies.
Details error alarms related to the programme key, including temperature warnings.
Describes error alarms specific to machines with optional features like ECO or DOS.
Provides the workplace related noise emission value measured according to DIN EN ISO 11202.
