What to do if my Wirquin Plumbing Product does not flush?
If your Wirquin Plumbing Product isn't flushing, make sure the push button rod is correctly placed in the push button rod locator on the internal overflow tube. Additionally, ensure that you have primed the system.
Adjust the overflow to be 20mm above the cistern's waterline.
Insert push button, ensuring rod connects to overflow tube locator.
Press the push button to activate and test flush cycles.
Modify the volume for full flushes by adjusting the mechanism.
Modify the volume for part flushes by adjusting the mechanism.
Solutions for issues like the valve not flushing and proper priming.
General| Brand | Wirquin |
|---|---|
| Model | ONE |
| Category | Plumbing Product |
| Language | English |
To Next Page