Wirquin ONE - Priming and Testing the Flushing Valve; Fill Cistern and Turn On Water; Test Full and Part Flushes; Confirm Valve Readiness

12 pages

To Next Page

To Previous Page

16 - Turn water supply back on and fill the cistern.

17 - Firmly press the full flush push button all the way down

and release, this will activate the full flush. Repeat for part flush.

Please note the full ush cycle works on the release of the

push button

18 - The flushing valve is now automatically adjusted and ready

for use.

IMPORTANT

Priming the flushing valve