Need help?Do you have a question about the WIRTGEN Hamm 3000 Series and is the answer not in the manual?
Explains the different model designations and their meanings.
Provides technical specifications for a specific model (H180 3412 HT).
Illustrates and labels key components on the left side of the machine.
Continues the illustration and labeling of components on the machine's left side.
Details the main controls and their functions within the operator's cabin.
Identifies and explains various control elements on the operator's console.
Provides a general overview of the machine's dashboard display and its indicators.
Explains indicators shown on the display during normal machine operation.
Details indicators related to the machine's driving and control functions.
Explains indicators related to the machine's vibration system.
Lists and explains various signal lamps and warning indicators.
Details the specifications and designation of the Deutz engine.
Identifies engine components on the left maintenance side.
Identifies engine components on the right side.
Illustrates the engine's lubrication oil system.
Explains the electronic control system and its components.
Details various engine sensors and their characteristics.
Illustrates the overall fuel system layout in the engine compartment.
Details the fuel prefilter, main fuel filter, and SEPAR filter.
Explains the function and characteristics of the fuel fill level sensor.
Details the air filter, its components, and maintenance advice.
Illustrates and labels the components of the exhaust system.
Identifies the main components of the engine's cooling pack.
Illustrates the coolant flow paths within the engine.
Details the engine cooler and related components.
Details the hydraulic oil cooler and its connecting block.
Explains the intercooler and its associated hoses and intake.
Illustrates the hydraulic system for tilting the engine hood.
Explains the function and components of the manual hydraulic pump.
Details the drive and vibration variable displacement pumps and their ports.
Explains the connecting block, cold starting valve, and temperature transmitter.
Details wheel gears, drum drive, axle, and motors.
Explains the vibration motor and parking brake valve.
Outlines the procedures for towing the machine.
Details hydraulic oil filters and the hydraulic oil tank.
Explains the PTO for steering and dozer blade pumps.
Details the battery, compartment, isolation switch, and main fuse box.
Explains the Hammtronic central electrical system and its computer.
Details fuses and relays in the standard electrical system.
Covers the machine display, LED switching points, and indicators.
Explains ignition switch, various other switches, sensors, and alarms.
Details light installations on the machine.
Explains the components and maintenance of the 3-point articulated steering joint.
Details the steering unit, its ports, and operating principles.
Details drum suspension and provides an overview of different drum types.
Explains the basic principles of drum operation and their internal components.
Details padfoot shells, scrapers, and travel rings.
Explains components for specific drum models like 3625 VC.
Details the dozer blade, its hydraulic and electrical systems.
Explains the vibratory plate and bypass filter components.
Covers safety devices, seat contact switch, and camera system.
Details speedometer, compaction meter, and calculator systems.
Explains the WIFMS gateway and diagnostic interface.
Details the auxiliary heater, its components, and electrical connections.
Lists error codes for the MC6 controller, including causes and troubleshooting.
Lists RC28 error codes and their corresponding locations or descriptions.
General| Brand | WIRTGEN |
|---|---|
| Model | Hamm 3000 Series |
| Category | Construction Equipment |
| Language | English |
To Next Page