Need help?Do you have a question about the WIRTGEN Hamm 3518 and is the answer not in the manual?
Explanation of the Deutz TCD 2012 engine designation and emission category.
Schematic diagram illustrating the engine's lubrication oil system.
Identification of electronic engine control components and sensors.
Details and characteristic curve for the engine temperature sensor.
Details and characteristic curves for the charge air temperature/pressure sensor.
Details and characteristic curve for the fuel low-pressure sensor.
Information on the camshaft speed sensor, including its resistance.
Information on the crankshaft speed sensor, including its resistance.
Details on the engine oil pressure sensor, including its measuring range and torque.
Labeled diagram of the engine's fuel system components and lines.
Example fuel diagram illustrating the TCD 2012 engine's fuel system.
Details and characteristic curve for the fuel fill level sensor.
Schematic diagram of the coolant system for Deutz TCD 2012 L06.
Diagram showing the cooler-engine connection and operating parameters.
Details on the coolant level sensor, including pin assignment and function.
Diagram and identification of the hydraulic oil cooler components and connections.
Information on the hydraulic oil temperature transmitter and its resistance curve.
Identification of ports and components on the variable displacement drive pump.
Identification of pump control ports and connections for vibration.
Diagram illustrating the wheel gears and drum drive components.
Identification of components on the drum drive variable displacement motor.
Identification of components on the axle drive variable displacement motor.
Identification of ports and connections on the vibration motor.
Diagram and identification of the parking brake valve and its components.
Instructions for towing the machine, including prior and after procedures.
Overview of the Hammtronic central electrical system components.
Overview of wire harness slots, jumpers, terminals, and diagnostic connectors.
Diagram of fuses within the Hammtronic central electrical system.
Identification of relays within the Hammtronic central electrical system.
Identification of computer modules and control units for HT systems.
Identification of the steering unit ports and geared hub profile.
Overview of MC6 error code lists and notes on error message interpretation.
Table of error messages, possible causes, consequences, and troubleshooting steps.
List of RC28 error codes related to various sensors and components.
List of RC28 error codes related to CAN communication, start routines, and shutdowns.
General| Operating weight | 18, 150 kg |
|---|---|
| Drum width | 2, 140 mm |
| Engine power | 115 kW / 156 HP |
| Drum Diameter | 1, 500 mm |
| Engine Manufacturer | Deutz |
| Static linear load | 320 N/cm |
| Travel Speed | 12 km/h |
To Next Page