Wise P953 - Installation; Wiring

1)
2)
3)
4)
5)
6)
7)
Store this product free of moisture, vibration, dust or corrosive gas.
Avoid higher temperature than specified in this manual.
Be prepared for lightning or vapor.
Avoid direct sunlight.
Use M5 bolts when fixing the product to the panel or wall through fixing holes. When you use fittings, fix them firmly.
Use a flexible tube for the impulse line to prevent excessive force on the pressure gauge.
For pipe connection, do not grab and turn the product case, rather use a designated spanner.
15
10. Installation
1)
2)
3)
4)
5)
6)
7)
Do not impose excessive force on the casing.
Use plastic insulated or cabtyre cables corresponding to the load.
Use an M4 solderless terminal for firm terminal connection.
Check the contact type before cable connection.
In case of conduit type, use waterproof sealing fittings.
In case of cable gland type, use waterproof cable glands.
A ground wire shall be at least 0.7sq.
11. Wiring