19
Tel +82-2-300-2300
Fax +82-2-300-2400
webmaster@wisecontrol.com
6.3.3 Temperature transmitter (WISE)
The temperature transmitter is integrated in the head, and converts measurement data into a current
signal (4~20mA). These signals can be read using other electrical equipment. The temperature
transmitter also has an integrated overcurrent protection circuit which automatically cuts off
overcurrent due to internal/external factors to protect the device.
6.3.4 Temperature transmitter (Other)
1) TH300 (MFR : SIEMENS)
2) TTH (MFR : ABB)
3) YTA70 (MFR : YOKOGAWA)
*Note
Temperature transmitters can be attached onto to General type units.
For units with an explosion proof rating, change the model (See Models: R911 and R912)
For wiring of temperature transmitters (Other), please consult the manual provided by each
manufacturer.
T900 (Thermocouple & RTD)
WTT-3100 (Thermocouple & RTD)
A
C
OUTPUT
H
+
L
4~20mA DC
-
mA,mV,V,T/C
B
B
+
-
PTM
RTD