Wise R Series - General Items; Introduction; Application; Warranty

3
C-QIM-2731-T01_EN_Rev.2
Tel +82-2-300-2300
Fax +82-2-300-2400
webmaster@wisecontrol.com
1. General items
1.1 Introduction
WISE Control Inc. temperature sensors and thermowells are precisely fabricated according to
customer specifications. The product come in a variety of types – basic, spring-loaded, non-metal
protection tube type– and can be selected and used accordingly to the usage environment. The
products must be tested and stored in appropriate locations, and the requirements provided in the
documentation, test reports and handling manuals, etc., must be adhered to in order to maintain
optimum state during the duration of use.
1.2 Application
Temperature sensors are used for temperature measurements in various processes. Measured values
are used for indication, recording and control in control panels or process systems. Depending on the
process situation, an appropriate thermowell may be selected and used, or a temperature sensor may
be inserted directly into a pipe without a thermowell. The thermowell is designed to protect a
thermometer or temperature sensor from fluid flow velocity, pressure and corrosion, etc., inside pipes.
The design prevents leakage of fluid from inside the pipe when a malfunctioning sensor is being
replaced. The user is responsible for selecting the appropriate thermowell for the process at hand.
WISE Control Inc. may provide advice when selecting products, but will not be held liable for mis-
selection of product.
1.3 Warranty
If one causes damage to the product due to failures to comply with the user manual, or if one
arbitrarily remodels it, changes or repairs the product, the manufacturer will not be responsible for it,
and the product warranty period will expire.