WisyCom MTP30 User Manual

WISYCOM s.r.l. - Via Spin, 156 - I-36060 Romano d’Ezzelino (VI) - Italy - MTP30-eng-b04.doc
Tel. (Ph.). +39 0424 382605 - Fax +39 0424 382733 - http:// www.wisycom.com
- e-mail: sales@wisycom.com
WIRELESS MICROPHONE SYSTEMS
MTP30
Ultra-lite Wireless Professional Transmitters
UMain Features
⇒ Up to 96 MHz bandwidth in 470/870 MHz range
⇒ Enhanced robustness against inter-modulation and antenna
performances:
Æ RF part with pass-band filter and circulator (option)
⇒ Miniature design with flexible pcb (no connectors)
for extended reliability
⇒ Ultra-light metal alloy body (80g without batteries)
⇒ ENR compander system
⇒ Battery:
- 2 AA Alkaline or rechargeable NiMH
⇒ Autonomy:
> 10h @ 50mW output power
> 14h @ 10mW output power
⇒ Infrared interface for management and firmware update
⇒ Easy and quick to setup thru an Oled display gain/freq button and a
joggle selector
⇒
Extended regulation on Mic input gain: 80dB in 2dB step
⇒
Max input level 26dBu (15.5 V clipping) to connect directly to mixers
and instruments
UGeneral Description
“MTP30 is an extremely small and light pocket
transmitters especially designed for professional
wireless microphone applications”
Very easy and quick to use thanks to OLED display and gain/freq
button and an easy joggle selector.
MTP30 benefits also of the latest Wisycom RF technology along with
an enhanced robustness against noise and inter-modulation
(available also with the RF circulator option).
Subject to change without notice

WisyCom MTP30 Specifications

General

Type	Bodypack transmitter
Modulation	FM
Audio Frequency Response	20 Hz - 20 kHz
Battery Life	Up to 10 hours
Operating Temperature	-10 °C to +50 °C
Frequency Range	470 MHz
RF Output Power	Up to 50 mW
Audio Input Level	6 dBu
Battery Type	Li-ion rechargeable battery
Charging Time	3 hours

Summary

MTP30 Main Features

Robustness and Antenna Performance

Enhanced robustness against inter-modulation and antenna performances with RF part filter.

Battery and Autonomy

MTP30 Technical Specifications

Frequency and Stability

Covers 470-870 MHz with 320 switchable channels and quartz PLL frequency synthesizer.

RF Power and Emissions

Audio Input Specifications

Wideband FM modulation, configurable AF input connector with 80dB adjustable gain range.

Signal Quality and Noise Reduction

High signal-to-noise ratio (typ. 115 dB) with ENR noise reduction.

Operation and Controls

Powering On and Display

Setup Controls and Menus

Display Menu Navigation

Access setup menus sequentially: status, tuning, audio, mic, RF power, etc.

Audio and Mic Settings

Adjust audio gain, high pass filter, mic mode (2/3 wires), phase, and PTT operation.

RF Power and Other Settings