Wittkopp SmartCam Installation Instructions

© Carl Wittkopp GmbH - Errors and omissions excepted
Installation instructions no 9999133-0
Installation instructions SmartCam
1 General instructions
• Please read the installation instructions carefully, before activating the lock.
• Attention: The turning knob may not be operated before assigning closing direction.
1.1 Liability notes
• The mounting of the electronic lock has to be carried out according to the installation instruction.
• By opening the lock cover warranty of the manufacturer will be void.
• Take care that the input unit or the lock and the battery cable should not be damaged.
2 Mounting
•Various lever versions can be mounted. Check the lock for flawless functioning.
• The electronic lock/mechanical emergency lock is maintenance free in normal domestic and office surroundings. After ap
prox. 10,000 closures it is recommended to carry out a security and functional test of the electronic lock.
• Do not insert any lubricants or other substances into the electronic lock.
2.1 Installation dimensions SmartCam 2.2 Drill pattern SmartCam
16
19,1
Ø
7
116
50
30,5
154,5
27
69
26,5
M19
116
13,6
2
Ø
6
50
30,5
154,5
27
69
26,5
M19
116
13,6
2
Ø
6
• When using the drilling plan use the graphic in the
given measurement

Wittkopp SmartCam Specifications

General

Brand	Wittkopp
Model	SmartCam
Category	Locks
Language	English