Need help?Do you have a question about the Wittkopp TwinLock 7220 and is the answer not in the manual?
Diagram illustrating the TwinLock 7220 alarm system components and connections.
Details the arming device used for burglary alarm system integration.
Role and authorization of master and system codes for lock and system administration.
Security measures for input units and arming devices.
Important notes and warnings regarding code programming.
Procedure for arming the BAS using the TwinAlarm device.
Procedure for disarming the BAS using the TwinAlarm device.
Procedure for emergency shutdown of BAS control via system code.
Step-by-step guide to change master or system codes.
Guide to program or reprogram user codes.
Steps to delete a user code from the system.
Programming multi-code requirements for unlocking.
Procedure for setting the system's date, time, and weekday.
Setting delays and release times for unlocking procedures.
Activating or deactivating the TwinAlarm arming device.
Allocating a physical code (chip card) to a specific user for BAS.
Deleting an alarm user from the arming device.
Activating a silent alarm via a modified unlocking code.
Procedure for registering or replacing locks in the system.
Resetting the input unit to factory default settings.
Factory reset procedure for an individual lock.
Factory reset procedure for the TwinAlarm arming device.
Setting the unlocking delay and release time for each lock.
Technical specifications for TwinControl and FlatControl input units.
Technical specifications for the TwinLock lock unit.
Technical specifications for TwinAlarm, TwinConnect, and TwinXT.
To Next Page
General
