To Next PageTo Next PageWhat to do if my Wixey Measuring Instruments display is not working?
If your Wixey Measuring Instruments display is blank, there are a couple of things to check. First, low voltage could be the issue, so try replacing the battery. Second, it could be due to bad contact. In this case, clean the battery contacts.
Why is the display on my Wixey WR25 freezing?
If your Wixey Measuring Instruments display is acting erratically or is frozen, it might be due to an internal error. To resolve this, remove the battery, wait for one minute, and then replace it.
How to fix flashing digits on Wixey WR25 Measuring Instruments?
If the digits on your Wixey Measuring Instruments are flashing, it's likely due to low voltage. Try replacing the battery to solve this issue.
General| Brand | Wixey |
|---|---|
| Model | WR25 |
| Category | Measuring Instruments |
| Language | English |
Explains how to turn the gauge on/off and set it to zero in absolute mode.
Describes toggling between inch/millimeter and absolute/incremental measurement modes.
Details the process of installing the battery and securing the scale lock knob.
Describes setting the gauge base on a surface and zeroing the display.
Explains how to set the router bit or saw blades to the desired position.
Details installing the plunger and zeroing the gauge for depth measurements.
