2
I MPORTANT I NFORMATION
This appliance must be installed in
accordance with all National Electrical
Codes, as well as all state, municipal
and local codes. The correct voltage,
frequency and amperage must be
supplied to the appliance from a
dedicated, grounded circuit that is
protected by a properly sized circuit
breaker or time delay fuse. The prop-
er voltage, frequency, and amperage
ratings are listed on the product
rating plate.
Record the model and serial numbers
before installing the ventilation hood.
Both numbers are listed on the rating
plate.
Model #
Serial #
If you have questions concerning the
installation of this product, call Wolf
Appliance Company, LLC at (800)
332-9513.
If you received a damaged ventilation
hood you should immediately contact
your dealer or builder.
IMPORTANT NOTE: This
installation must be completed
by a qualified installer or
service agency.
Before you begin installation, read
these instructions completely and
carefully.
• INSTALLER: please retain these
instructions for local inspector’s
reference, then leave them with the
homeowner.
• Please read the entire installation
instructions prior to installation.
• HOMEOWNER: please read and
keep these instructions for future
reference.
• Please read the entire Use and Care
Information book prior to use.
As you follow these installation
instructions, take particular note of
the CAUTION and WARNING
symbols when they appear. This
information is important for the safe
and efficient installation of the Wolf
ventilation hood.
In addition, the printed instructions
may signal an IMPORTANT NOTE,
which highlights information that is
especially important for a problem-
free installation.
To Next Page
Loading...
